ST-38

Max. machining diameter is 38mm! Complex machining for extra large parts with high speed and universal control.

  • Simultaneous machining such as turning, milling etc. achieved by opposed twin turret design tool post dramatically reduces the machining time.
  • Independent machining of front and rear ends by backworking turret reduces the cycle time yet further.
  • STAR Motion Control System is a unique control technology which minimizes non-cutting time.
  • The Star Motion Control System
  • RMGB
  • XYZ axes control turret
  • Balance cut turning

Tool Post

Tool Post
Tool Post Tooling
Turning tool max.2 tools/station
(□16mm)
Front-end working tool max.3 tools/station
Rear-end working tool max.3 tools/station
Power-driven tool max.2 tools/station
Turning tool max.2 tools/station
(□16mm)
Back working tool max.3 tools/station
Power-driven tool max.2 tools/station

Specifications

Item ST-38
Max.machining diameter ø38mm(1-1/2in)
Max.headstock stroke Standard 350mm(13-25/32in)
R.M.G.B.unit 315mm(12-13/32in)
Front turret tool post Front 10 stations
Rear 10 stations
Turning tool 1 tool/station(□20mm) ,
max.2 tools/station(□16mm)
Sleeve holder Number of tools max.3 tools/station
Max.drilling capability ø23mm(29/32in)
Max.tapping capability M16×P2.0
Power-driven att. Number of tools max.2 tools/station
Max.drilling capability ø10mm(25/64in)
Max.tapping capability M8×P1.25
Spindle speed max.5,700min-1
Drive motor 2.7kw(Continuous) / 4.0kw(5min./30%ED)
Rapid feed rate 30m/min(X1,Z1,X2,Z2,X3,Z3)
15m/min(Y1,Y2,Y3) , 3.9m/min(YA2)
Main spindle indexing angle C-axis control
Main spindle speed max.7,000min-1
Main spindle motor 7.5kw(Continuous) / 11.0kw(10min./25%ED)
Dimensions (W×D×H) 3,477×1,859×1,865mm
Weight 6,250kg
Power consumption 10.5KVA

Backworking Attachment

Item ST-38
Max.chucking diameter ø38mm(1-1/2in)
Max. length for front ejection 150mm(5-7/8in)
Max.work projection length 75mm(2-61/64in)
Back working turret tool post 10 stations
Turning tool 1 tool/station(□20mm) ,
max.2 tools/station(□16mm)
Sleeve holder Number of tools max.3 tools/station
Max.drilling capability ø23mm(29/32in)
Max.tapping capability M12×P1.75
Power-driven att. Number of tools max.2 tools/station
Max.drilling capability ø10mm(25/64in)
Max.tapping capability M8×P1.25
Sub spindle indexing angle C-axis control
Sub spindle speed max.7,000min-1
Sub spindle motor 5.5kw(Continuous) / 7.5kw(10min./40%ED)

Contact Us